MountingInstructions
No tools. No drilling. Just peel, stick, and snap. Here is everything you need to know.
Mount in Under 60 Seconds
Clean Your Wall Surface
Wipe the mounting area with a clean, dry cloth to remove dust and debris. The adhesive works best on smooth, painted surfaces such as drywall, plaster, painted wood, and tile. Avoid textured wallpaper and unfinished concrete.
Attach the Steel Mounting Plate
Peel the protective backing from the adhesive steel plate. Position it on your wall where you want the panel and press firmly for 10 seconds. For multi-panel layouts, use a ruler or level to keep your plates evenly spaced. Wait 30 minutes before mounting panels for best adhesion.
Snap Your Panel Into Place
Each Artile panel has neodymium magnets embedded in the back. Simply bring the panel close to the steel plate and it will snap into place with a satisfying click. The magnets hold firmly but allow easy removal and repositioning.
Expand and Rearrange Anytime
Add more mounting plates and panels whenever you want. Build outward from any edge. Swap panels between positions. The modular system means your layout is never permanent and always expandable.
Spacing Tips
For the cleanest look, leave a 3-5mm gap between panels. This creates a subtle grid effect that emphasizes the modular design.
For a seamless mural look, mount panels as close together as possible. The split mural layouts are designed to line up edge-to-edge.
Use painter's tape as a guide line when mounting multiple rows to keep everything level.
Removal
To remove panels, simply pull them off the magnetic plate. To remove the steel mounting plate from the wall, slowly peel from one corner using dental floss or a thin card behind the adhesive to break the bond.
The adhesive is designed to be removable without damaging paint on smooth surfaces. As with any adhesive product, results may vary on older or delicate paint finishes. Test in an inconspicuous area first if you are concerned.